Could Robots Hang Drywall? The Japanese Advanced Industrial Science and Technology release this video 6 months ago of the HRP-5P. In this video the robot ste...

Even for the drywall pros one of the most difficult part of the trade is to finish a butt-joint. The butt joint are the joint where two non-tapered ends of d...

In this video I will show you How to tape and glaze a drywall inside corner in 5 steps and 5 minutes. Using a compound tube and a Columbia inside corner appl...

You will need a few tools and a bit of material. Tools & Material Drywall cutting blade Drywall taping knife Screwdriver or Drill Trowel Measuring tape Tape ...

These Drywall bulkheads look great in a Medical office,Dental office or any office waiting room where the ceiling is high and unfinished . The Drywall bulkhe...

First, you will have to look over the drywall installation and do your small inspection. Look for big gap in drywall joints and peel off any paper that is lo...

You will have less screws to spot by using adhesive and your drywall taper will be happier. Installing drywall with adhesive has some advantage to using only...

Murwall's plasterer have receive their training on the use and maintenance of stilts. Stilts must be used with proper training and workers must complete prac...

First,let's introduce the different type of corner beads available out there. There is metal corners,paper face beads.laminated beads and plastic beads. Afte...

Once the preparation is complete, we can start installing the drywall board. To get the least amount of joint, use 4 'x 12' x ½ "drywall sheets.Drywall is av...